Compression Fittings Technical Data

metal sealing can be single or double- ferrule/ring selection.

Compression Fittings Technical Data

metal sealing can be single or double- ferrule/ring selection.
metal sealing can be single or double- ferrule/ring selection.
Metal Sealing

Compression Fittings employ metal sealing mechanism and are exclusive for metric tube; they come in series of “L” and “S” (for light-duty and heavy-duty respectively); see table below for their selection.

Compression Fittings Installation Instructions

1. Apply anti-seize lubricant to the threads of the fitting body.
2. Slide nut and ring onto the tube in sequence and in correct direction.
3. Insert the tube into the fitting body.
4. Make on the body and nut after finger-tightening the nut. Wrench the nut 1-1/2 turns

Compression fitting installation instruction

Pressure Load: L / S series selection

1. Pressure: select appropriate series according to desired pressure.
2. Space: select series based on available space

L (light-duty) / S (heavy-duty) series
SeriesLS
Design Light / Thin Heavy / Thick
Pressure100~250kgf/cm2250~400kgf/cm2
Suitable for heavy-duty applicationsGoodExcellent
Tube Size6, 8,10,12,15,18,22,28,35,42mm6,8,10,12,14,16,20,25,30,38mm
Tightening TorqueNormalHigh
ApplicationsMachines tools, agricultural equipment, trucksHydraulic press, injection molding, machinery, metallurgy, shipbuilding, engineering machinery

CHIBIN Machine Compression Fittings Technical Data Introduction

CHIBIN Machine Co., Ltd. is Taiwan supplier and manufacturer in Stainless steel industry. CHIBIN Machine has been offering our customers high quality Tube Fittings, Compression Fittings, Rapid Pneumatic Fittings, Push-in Pneumatic Fittings, Hydraulic Fittings, High Pressure Pipe Fittings, Quick Couplings, Nozzle, Needle Valve since 1980. With both advanced technology and 20 years experience, CHIBIN Machine always make sure to meet each customer's demand.

Press Release